The electrical energy carried onboard a BEV to power the motors is obtained from a variety of battery chemistries arranged into battery packs. For additional range genset trailers or pusher trailers are sometimes used, forming a type of hybrid vehicle. Batteries used in electric vehicles include "flooded" lead-acid, absorbed glass mat, NiCd, nickel metal hydride, Li-ion, Li-poly and zinc-air batteries.

Thomas Edison  - 1912 Detroit Electric

While hybrid vehicles apply many of the technical advances first developed for BEVs, they are not considered BEVs. Of interest to BEV developers, however, is the fact that hybrid vehicles are advancing the state of the art (in cost/performance ratios) of batteries, electric motors, chargers, and motor controllers, which may bode well for the future of both pure electric vehicles and the so called "plug-in hybrid".

History

BEVs were among the earliest automobiles, and before the preeminence of light, powerful internal combustion engines, electric automobiles held many vehicle land speed and distance records in the early 1900s. Most notable was perhaps breaking of the 105.88 km/h (65.79 mph) speed barrier by Camille Jenatzy on 29.4 1899 in his rocket-like EV named La Jamais Contente. This was the first world record over 100 km/h.

BEVs were produced by Anthony Electric, Baker Electric, Detroit Electric, and others and at one point in history out-sold gasoline-powered vehicles.

Some feel that the introduction of the electric starter by Cadillac in 1913, which simplified the difficult and sometimes dangerous task of starting the internal combustion engine, was the downfall of the electric vehicle, as 1912 may have been the pinnacle year for BEVs. Still others point out that it was radiators, in use as early as 1895 by Panhard-Levassor in their Systeme Panhard design, which allowed engines to keep cool enough to run for more than a few minutes, before which they had to stop and cool down at horse troughs along with the steamers to replenish their water supply. The truth may be that EV's had fallen out of favor over the mass produced Ford Model-T which went into production four years earlier in 1908.

X1 electric car v Lamborghini

Efficiency

Production and conversion battery electric vehicles typically achieve 0.3 to 0.5 kWh per mile (0.2 to 0.3 kWh/km). The U.S. fleet average of 23 mpg of gasoline is equivalent to 1.46 kWh/mi and the 70 mpg Insight gets 0.48 kWh/mi (assuming 33.6 kWh per U.S. gallon of gasoline), so battery electric cars vehicles are relatively efficient. When comparisons are made for the total energy cycle, the efficiency figures for BEVs drop, but such calculations are not commonly offered for ICE vehicles (e.g. the loss of efficiency from energy used to produce specialized fuels such as gasoline as compared to the raw energy available from crude oil or natural gas.

CO₂ emission comparisons [5] are one good indication of the current grid-mix vs gasoline consumption. Such comparisons include production, transmission, charging, and vehicle losses. The CO₂ emissions can improve for BEVs through the use of sustainable grid or local resources but are essentially fixed for gasoline vehicles. Unfortunately the EV1, Ranger EV, EVPlus, and other production vehicles are missing from this site.

Venturi Fetish production electric 0-100km/h in 4.5 secs

• RAV4-EV vs Gas RAV4

• 2000 Toyota RAV4-EV 4.1 short tons CO₂ (104 mpg)

• 2000 Toyota RAV4 2wd 7.2 short tons CO₂ (26 mpg)

• Other BEVs

• 2000 Nissan Altra EV 3.5 short tons CO₂

• 2000 Nissan Altra EV 3.5 short tons CO₂

• 2002 Toyota RAV4-EV 3.8 short tons CO₂

• 2002 Ford Explorer 7.8 short tons CO₂ (USPS)

• Hybrids

• 2000 Honda Insight 3.0 short tons CO₂

• 2001 Honda Insight 3.1 short tons CO₂

• 2005 Toyota Prius 3.5 short tons CO₂

• 2005 Ford Escape H 2x 5.8 short tons CO₂

• 2005 Ford Escape H 4x 6.2 short tons CO₂

• Standard ICE vehicles

• 2005 Dodge Neon 2.0L 6.0 short tons CO₂

• 2005 Ford Escape 4x 8.0 short tons CO₂

• 2005 GMC Envoy XUV 4x 11.7 short tons CO₂

It is important to study the full effect of any vehicle design, especially when promoted as better than the status quo. The goal may be to look at overall efficiency only or it may be the total environmental impact, since environmental damage reduction is often the goal behind alternative vehicle efforts. Many factors must be considered when making an overall comparison of total environmental impact. The most comprehensive comparison is known as a cradle-to-grave or lifecycle analysis. The analysis considers all inputs including original production and fuel sources and all outputs and end products including emissions and disposal. The varying amounts and types of outputs and inputs vary in their environmental effects and are difficult to directly compare. For example, are the environmental effects of nickel or cadmium contamination from a battery production facility less than those of hydrocarbon emissions or from petroleum refining? If so, how much, or how much of each would be equivalent? Similar types of questions would need to be resolved for each input and output in order to make a comparison.

A large lifecycle input difference is that the electric vehicle requires electricity instead of a liquid fuel. The advantage of the electric vehicle is that the electricity can be provided by renewable energy. However, if the electricity is produced from fossil fuel sources (as most electricity currently is) the advantage of the electric vehicle is reduced, or nearly eliminated. Thus utilizing and developing additional renewable energy sources is required for electric vehicles to further reduce their net emissions.

The input for electric vehicle production that differs from internal combustion types is primarily in the large battery. The batteries, however, may not last as long as combustion engines, and needing to be replaced would account for a greater input requirement for their production. However, as BEVs do not require an ICE engine, support systems or related maintenance, they should be more reliable and require less maintenance. Although BEVs are not common, there are related markets which require advances in battery technology, such as mobile phones, laptops, forklifts and hybrid electric vehicles. Improvements to battery technology for any of these other markets will make BEVs more practical too.

KIA Sidewinder hybrid for 2008 - powered by a natural gas turbine 

with electric drive motors in each wheel

Performance

Many of today's electric vehicles are capable of acceleration performance which exceeds that of conventional gasoline powered vehicles. Electric vehicles can utilize a direct motor to wheel configuration which increases the power deliverability to the wheels. Having multiple motors connected directly to the wheels allows for each of the wheels to be used for both propulsion and as braking systems, thereby increasing traction. 

In some cases, the motor can be housed directly in the wheel, such as in the Whispering Wheel design, which lowers the center of gravity and reduces the number of moving parts. When not fitted with an axle, differential or transmission, many electric vehicles have greater torque availability, which goes directly to accelerating the wheels. A single gear design in some electric vehicles eliminates gear shifting, giving the newer electric vehicles both smoother acceleration and braking. This also allows higher torque at wide rpm levels. Nonetheless, top speed and total possible drive-train efficiency are severely limited by the lack of a gearbox. For example, the Venturi Fetish delivers supercar acceleration, yet is limited to a top speed of only 100mph.

Fuels

There are no currently available technologies which can provide all of the energy required for the life of a BEV car. This means that all BEV cars must be refuelled by periodic charging of the batteries.

BEVs most commonly charge from the power grid, which is in turn generated from a variety of domestic resources — primarily coal, natural gas, and nuclear. Home power such as roof top photovoltaic panels, microhydro or wind can also be used. Electricity can also be supplied with traditional fuels via a generator.

Range

The range of a BEV depends greatly on the number and type of batteries used. The weight and type of vehicle also has an impact just as it does on the mileage of traditional vehicles. Conversions usually use lead-acid batteries because they are the most available and inexpensive, such conversions generally have 20 to 50 miles (30 to 80 km) of range and are built to satisfy the drivers' individual needs. Production EVs with lead-acid batteries are capable of up to 80 miles (130 km) per charge. NiMH chemistries have high energy density and can deliver up to 120 miles (200 km) of range. 

Lithium ion equipped EVs have been claimed in press releases to have 250-300 miles (400-500 km) of range per charge[7]. EVs can also use pusher trailers or genset trailers in order to function as a hybrid vehicle for occasions when unlimited range is desired without the additional weight during normal short range use. The vehicle becomes an internal combustion vehicle when utilizing the trailer, but it allows the greater range that may be needed for limited times while making the advantages of the BEV available for most shorter trips.

In practice most vehicle journeys of all kinds are quite short, the majority being under 30 km (20 mi) per day. Thus, a BEV that can do 60 km (40 mi) in a day is quite practical for most trips for most users, and a substantial additional range can be added for commuters where charging facilities are available at the destination.

Mercedes Benz F 600 Hygenius

The new F 600 HYGENIUS is the latest in the series of research vehicles from Mercedes-Benz that point the way forwards for the future. Powered by a zero-emission fuel cell drive with an output of 85 kW/115 hp, the compact-class car with a family-friendly design consumes the equivalent of 2.9 litres of fuel per 100 kilometres and has an operating range in excess of 400 kilometres.

Dr. Thomas Weber, Daimler-Chrysler AG Board Member for Research & Technology and Head of Development at the Mercedes Car Group, said: "By developing the fuel cell, we are creating a new basis for supplying energy in tomorrow's vehicles which will make a further lasting improvement to their environmental compatibility."   "This represents a major step towards bringing the fuel cell drive up to full production maturity, a goal that we aim to achieve some time between 2012 and 2015."

In addition to the fuel cell technology, the Mercedes-Benz research vehicle also showcases an operating concept with virtual displays, new-style seats and other pioneering technologies designed to enhance safety and passenger comfort.

Battery charging

The charging time is limited primarily by the capacity of the grid connection. A normal household outlet is between 1.5 kW in the US to 3 kW in countries with 240 V supply. The main connection to a house might be able to sustain 10 kW, and special wiring can be installed to use this. At this higher power level charging even a small, 7 kWh (14–28 mi) pack, would probably require one hour. Compare this to the effective power delivery rate of an average petrol pump, about 5,000 kW. Even if the supply power can be increased, most batteries do not accept charge at greater than their 'charge rate' C1.

Some recent handheld device battery designs by Toshiba [8] are claimed to be capable of accepting an 80% charge in as little as 60 seconds. Scaling this specific power characteristic up to the same 7 kWh EV pack would result in the need for a peak of 336 kW of power from some source for those 60 seconds. It is not clear that such batteries will work directly in BEVs as heat build-up may make them unsafe.

Most people do not require fast recharging because they have enough time (6 to 8 hours) during the work day or overnight to refuel. As the charging does not require attention it takes a few seconds for an owner to plug in and unplug their vehicle. Many BEV drivers prefer refueling at home, avoiding the inconvenience of visiting a petrol station. Some workplaces provide special parking bays for electric vehicles with charging equipment provided.

The charging power can be connected to the car in two ways. The first is a direct electrical connection known as conductive coupling. This might be as simple as a mains lead into a weather proof socket through to special high capacity cables with connectors to protect the user from high voltages. The second approach is known as inductive coupling. A special 'paddle' is inserted into a slot on the car. The paddle is one winding of a transformer, while the other is built into the car. When the paddle is inserted it completes a magnetic circuit which provides power to the battery pack. The major advantage of this approach is that there is no possibility of electrocution as there are no exposed conductors although interlocks can make conductive coupling nearly as safe. Conductive coupling equipment is lower in cost and much more efficient due to a vastly lower component count.

Battery life

Individual batteries are usually arranged into large battery packs of various voltage and ampere-hour capacity products to give the required energy capacities. Battery life must be considered when calculating cost of operation, as all batteries wear out and must be replaced. The rate at which they expire depends on a number of factors.

New scientific and empirical evidence from running individual EV conversions shows that most of these negative factors linked to batteries connected in series for traction application can be mitigated with good DC/DC based Battery Management System, thermo insulation/venting, and proper care. That also includes selecting a well balanced mix of components oriented towards specific performance properties, i.e. range, speed. For instance a recombination type of lead-acid battery with C1 hour discharge rate about 120Ah (equals to 220Ah C20 "marketing rating") should be used accordingly. 

Therefore the EV overall consumption of particular low/mid voltage vehicle should not often exceed in this example 80-100% of this C1 hours rating — this applies for more advanced battery chemistries like Li-ion with slightly higher discharges C3-C5 as well. In this particular example, longevity of the lead-acid battery pack will be preserved by not discharging it in a prolonged or continuous regime above 120Ah currents.

The depth of discharge (DOD) is the recommended proportion of the total available energy storage for which that battery will achieve its rated cycles. Deep cycle lead-acid batteries generally should not be discharged below 50% capacity. More modern formulations can survive deeper cycles.

In real world use some fleet RAV4-EVs have exceeded 100,000 miles (160,000 km) with little degradation in their daily range. Jay Leno's 1912? Baker Electric still operates on its original Edison cells. Battery replacement costs may be partially or fully offset by the lack of regular maintenance such as oil and filter changes and by greater reliability due to fewer moving parts.

Critics claim that batteries pose a serious environmental hazard requiring significant disposal or recycling costs. Some of the chemicals used in the manufacture of advanced batteries such as Li-ion, Li ion polymer and zinc-air are hazardous and potentially environmentally damaging. While these technologies are developed for small markets this is not a concern, but if production was to be scaled to match current car demand the risks might become unacceptable.

Supporters counter with the fact that traditional car batteries are one of the most successful recycling programs and that widespread use of battery electric vehicles would require the implementation of similar recycling regulations. More modern formulations also tend to use lighter, more biologically remediable elements such as iron, lithium, carbon and zinc. In particular, moving away from the heavy metals cadmium and chromium makes disposal less critical.

It is also not clear that batteries pose any greater risk than is currently accepted for fossil fuel based transport. Petrol and diesel powered transportation cause significant environmental damage in the form of spills, smog and distillation byproducts.

Austria Solar electric car 1991

Safety

Firefighters and rescue personnel receive special training to deal with the higher voltages encountered in electric and hybrid gas-electric vehicle accidents.

Future

The future of battery electric vehicles depends primarily upon the availability of batteries with high energy densities, power density, long life, and reasonable cost as all other aspects such as motors, motor controllers, and chargers are fairly mature and cost competitive with ICE components.

The most likely future for BEVs currently appears to be the incremental improvements needed for hybrids. Hybrid EVs are a smaller step from purely ICE driven cars, yet share much of the same core technology as true BEVs. As hybrids become more refined, battery life, capacity and energy density will improve and the combustion engine used less (particular with PHEV). At some point it may become economic for hybrids to be sold without their ICE, finally leading to BEVs being commonplace.

Alternatively, if fuel cells make a breakthrough neither BEVs nor hybrids will be required. More likely fuel cells will replace the ICE in hybrid designs, providing a large energy density, whilst a more traditional battery pack provides the required power density.

Li-ion, Li-poly and zinc-air batteries have demonstrated energy densities high enough to deliver range and recharge times comparable to conventional vehicles. Their greater cost has discouraged use in commercial BEVs, but as production increases for other markets BEVs will no doubt use them.

Flywheel energy storage is a completely different form of electrical energy storage. It shares a lot with battery technologies and both batteries and flywheels are used in the same applications. Recent advances in materials and electronic control makes a flywheel 'BEV' a strong possibility. There have been prototype electric locomotives using flywheel storage.

Owners

The greatest fans of BEVs are those who have obtained or built and used them. This is a self-selected group because BEVs have not been promoted by the major manufacturers in the United States, so their enthusiasm may be misleading. Owners of conventional gasoline vehicles, once given the chance to live with an BEV often leave their gasoline cars sitting in the driveway. Spouses, luke warm when the vehicle is purchased often take over the vehicle from the purchaser once they use it. Fans point out the following:

• People can take responsibility for their own energy production with renewables. This will reduce dependence on foreign oil and large scale coal mining. Many electric vehicle owners and operators express great satisfaction in this aspect of electric vehicle use, even while acknowledging that this use can have only little effect on these matters unless adopted more widely and produced in greater quantities.

• Battery electric vehicles are quieter than ICE powered vehicles.

• BEVs do not produce noxious fumes around the car.

• If packs were mass-produced the charging time could be increased by swapping the pack over with the charger. (This is not practical currently as the battery packs are far too heavy to handle without special tools)

Stockpile of crushed EV1s

Controversy

Some USA EV fans have accused the three major domestic manufacturers, General Motors, Chrysler Corporation and Ford Motor Company of deliberately sabotaging their own electric vehicle efforts through several methods: failing to market, failing to produce appropriate vehicles, failing to satisfy demand, and using lease-only programs with prohibitions against end of lease purchase. By these actions they have managed to terminate their BEV development and marketing programs despite operators' offers of purchase and assumption of maintenance liabilities. They also point to the Chrysler "golf cart" program as an insult to the marketplace and to mandates, accusing Chrysler of intentionally failing to produce a vehicle usable in mixed traffic conditions. 

The manufacturers, in their own defense, have responded that they only make what the public wants. EV fans point out that this response is the same argument used by GM to justify the intensively promoted 11 mpg 6500 lb (2,950 kg) Hummer H2 SUV. Of the various BEVs marketed by the "Big Three", only the General Motors EV1 (manufactured by GM) and the Th!nk City (imported and marketed by Ford) came close to being appropriate configurations for a mass market. However, at the end of their programs GM destroyed its fleet, despite offers to purchase them by their drivers. Ford's Norwegian-built "Th!nk" fleet was covered by a three-year exemption to the standard U.S. Motor Vehicle Safety laws, after which time Ford had planned to dismantle and recycle its fleet; the company was, however, persuaded by activists to not destroy its fleet but return them to Norway and sell them as used vehicles. Ford also sold a few lead-acid battery Ranger EVs, and some fleet purchase Chevrolet S-10 EV pickups are being refurbished and sold on the secondary market.

Both Honda and Toyota also manufactured electric only vehicles. Honda followed the lead of the other majors and terminated their lease-only programs. Toyota offered vehicles for both sale and lease. While Toyota has terminated manufacture of new vehicles it continues to support those manufactured. It is actually possible to see a RAV-4 EV on the road but this is indeed a rare sight.

Fastest electric dragster

United States

The United States produced many electric automobiles, such as the Detroit Electric, during the early 20th century, but production dropped to insignificant numbers with the triumph of gasoline powered internal combustion engine vehicles in the 1920s.

In recent years, electric vehicles have been promoted through the use of tax credits. In California, the California Air Resources Board attempted to set a quota for the use of electric cars, but this was withdrawn after complaints by auto manufacturers that the quotas were economically unfeasible due to a lack of consumer demand. However, many believe this complaint to be unwarranted due to the claim that there were thousands waiting to purchase or lease electric cars from companies such as General Motors, Ford, and Chrysler in which these companies refused to meet that demand despite their production capability. 

Others note that the original electric car leases were at reduced cost and the program could not be expected to draw the high volumes required without selling or renting the cars at a financial loss. Since the California program was designed by the California Air Resources Board to reduce air pollution and not to promote electric vehicles, the zero emissions requirement in California was replaced by a combination requirement of a tiny number of zero-emissions vehicles (to promote research and development) and a much larger number of partial zero-emissions vehicles (PZEVs), which is an administrative designation for an super ultra low emissions vehicle (SULEV), which emits pollution of about ten percent of that of an ordinary low emissions vehicle.

Outside the United States

In London, electrically powered vehicles are one of the categories of vehicle exempted from the congestion charge. This is also true in all of Norway, where zero-emission vehicles are also allowed to use the bus lane. In most cities of the United Kingdom low speed milk floats (milk trucks) are used for the home delivery of fresh milk.

Production vehicles

Recent or current production battery electric vehicles sold or leased to fleets include:

• AC Propulsion tzero Very fast two-seat sportster prototype. Four produced.

• Anthony Electric

• Arton Birdie

• Baker Electric

• Bertone Blitz

• Citicar/CommutaCar/Comuta-Van

• Citroën Berlingo Electrique

• Chevrolet S10 EV (Some sold to fleets, available on secondary market as refurbished vehicles) S-10 with EV1 powertrain, over 100 produced only 45 sold to private owners and survived. Currently only EVbones in Mesa AZ restores and converts to NiMH battery packs. 2005

• Chrysler TEVan (1993-1995) and Second Generation EPIC (1998-200?)

• Commuter Cars Tango Narrow, fast two seater (fore and aft.) Now accepting pre-orders in the US.

• Corbin Sparrow Three-wheeled, highway capable single-seat vehicle

• Detroit Electric (1907-1939)

• Elcat (1985-2002, almost all vehicles in second-hand use)

• Ford Ranger EV (1998-2003) some sold, most leased.
  (Several hundred produced for lease only, almost all recovered and most destroyed)
  (Ford has announced reconditioning and sale of a limited quantity to former leaseholders by lottery)

• General Motors EV1 Gen 1 (1996-1997), Gen II (1999-2003)
  (Over a thousand produced for lease only, all recovered and most destroyed)

• Global Electric Motorcars, LLC. GEM Quite common in Davis, California.

• Honda EV Plus (199?-1999)
  (Several hundred produced for lease only, all recovered and most destroyed)

• Hyundai SantaFe EVCurrently testing fast charge in Hawaii 2005

• Kewet

• Maranello 4cycle — Italiano

• Nissan Altra Lithium-powered hatchback; never offered (even by lease) to consumers

• Porsche 550 Spyder replica electric conversion

• Peugeot 106 EV

• Peugeot Partner

• Pivco City Bee

• Renault EV Kangoo

• REVA India-built city car (40 mph top speed,) now also sold in England as the "G-Whiz"

• Sebring-Vanguard Citicar

• Sinclair C5

• Solectria Force (Conversion, not currently in production)

• Think City (Norwegian import by Ford, lease only, all recovered and returned to Norway)

• Toyota RAV4 EV
  (Rare, some leased and sold on U.S. East and west coast, out of production, supported) Toyota agreed to stop crushing

• Toyota Force

• Twike3 wheeled Swedish EV with peddal assist optiion.

• Universal Electric Vehicle Corporation Electrum series Spyder, Com V-3

• Venturi Fétish Marketed as the world's first electric sports two-seater. Monaco

• Zap Manufactures the Xebra electric car, the U.S. only mass produced enclosed electric vehicle

• Zebra Model Z roadster (Formerly Renaissance Tropica)

• Zytec Lotus Elise

Prototypes

Recent prototype EVs include:

• Eliica (Electric LIthium-Ion Car) designed by a team at Keio University in Tokyo, led by Professor Hiroshi Shimizu.

• Cree SAM

• Ford E-Ka

• Lexus EV (Featured in the film Minority Report)

• Pinanfarina Ethos II

• Renault EV Racer

• Solectria Sunrise

• Subaru Zero EV

• Suzuki EV Sport

• Maya-100 Battery: Li-ion "super"-polymer; claimed range: 360 km

• Mitsubishi Colt EV (Li-ion battery, in-wheel motors)

• Volvo 3CC Three seater with lithium ion batteries

• Electric Scooter Razor Electric Bikes

Production announcements

• Venturi "Fetish" sports car to use AC propulsion components

  • Forbes — Vehicle of the Week — Car Fetish

• AC propulsion announces plans to convert Toyota Scion xA and xB vehicles (items 8 and 9).

• Mitsubishi, a Japanese automobile manufacturer, announced on May 11, 2005 that it will mass-produce its MIEV (Mitsubishi In-wheel Electric Vehicle.) Test fleets are to arrive in 2006 and production models should be available in 2008. The first test car, revealed to be Colt EV, is expected to have a range of 93 miles using lithium-ion batteries and in-wheel electric motors. The target price of a MIEV should be around US$19,000. No export decision has yet been made.

• Plug-in hybrid electric vehicle are being developed by calcars and Edrive. They take a Toyota Prius, add more battery capacity and modify the controller. Then they can get 250 mpg by plugging in at home for a small light charge each night. http://www.calcars.org/

Hobbyists, research, and racing

There is a minor industry supporting the conversion and building of BEVs by hobbyists. Some designers point out that a specific type of electric vehicle offers comfort, utility and quickness, sacrificing only range. This is called a short range electric vehicle. This type may be built using high performance lead–acid batteries, but of only about half the mass that would be expected to obtain a 60 to 80 mile (100 to 130 km) range. 

The result is a vehicle with about a thirty mile (50 km) range, but when designed with appropriate weigh distribution (40/60 front to rear) does not require power steering, offers exceptional acceleration in the lower end of its operating range, is freeway capable and legal, and costs less to build and maintain. By including a manual transmission this type of vehicle can obtain both better performance and higher efficiency than the single speed types developed by the major manufactures. 

Unlike the converted golf carts used for neighborhood electric vehicles, these may be operated on typical suburban throughways (40 to 45 mph or 60 or 70 km/h speed limits are typical) and can keep up with traffic typical to these roads and to the short on and off segments of freeways that are common in suburban areas.

Aside from production electric cars, often hobbyists build their own EVs by converting existing production cars to run solely on electricity. Some even drag race them as members of NEDRA. Universities such as the University of California, Irvine even go so far as to build their own custom electric or hybrid-electric cars from scratch.

A non-profit program "CalCars" at the University of California, Davis, is attempting to convert a hybrid Toyota Prius automobile to operate as a plug-in hybrid electric vehicle (PHEV) through the installation of additional batteries and software modifications. Such a vehicle will operate as would a pure electric for short trips, taking its power from household and workplace rechargers. For longer trips the vehicle will operate as it does at present—as a "strong" hybrid vehicle. A prototype (using sealed lead-acid batteries) is undergoing tests. It is expected that a production conversion would use a more advanced battery. (Advanced batteries are under development and soon for production in the support of hybrid vehicles.) They are currently soliciting donations of additional vehicles and funds for this project.

Battery electric vehicles are also highly popular in quarter mile (400 m) racing. The National Electric Drag Racing Association regularly holds electric car races and often competes them successfully against exotics such as the Dodge Viper.

Eliica prototype 

• Japanese Prof. Dr. Hiroshi Shimizu from Faculty of Environmental Information of the Keio University created the limousine of the future: the Eliica (Electric Lithium Ion Car) has 8 wheels with electric 55 kW hub motors (8WD) with an output of 470 kW and zero emissions. With a top speed of 190 km/h and a maximun reach of 320 km provided by lithium-ion-batteries. See the video at [20]

• German Umweltbrief [21] want to convert an old-timer car into full electric drive with 4 wheel hub motors; a retro car for the 21th century called electro4. This drive is nearly free of abrasion and maintenance and very reliable. Further advantages are optimal capability of acceleration and best traction through individual control of the wheels. Also the power is generated in the place where its used. Gearbox, kardan shaft and drive shaft become unnecessary, which means less weight. Even an old car can get a torque of 1000 N·m. This 4WD is very silent. There is no vibration and no motor cold-running, the full energy is available immediately. Also small cars can get this system. All is combinable with anti-block system, anti-slip system, stability system, etc., climate control with a/c, heating/cabin, pre-conditioning etc. [22]

EV LINKS:

• Electric Auto Association

• Electric Vehicle Council of Ottawa

• Electric Car Conversion

• EV Photo Album, over 500 Global EVs and conversions

• National Electric Drag Racing Association Website

• BEV FAQ at EVParts.com

• EV World

• Elektromobil.com — German Site for EVs in Europe

• Elektromobily.wz.cz — Czech EV club

• Electrifying Times

• European Electric Road Vehicle Association

• Electric Vehicle Council of Ottawa — EVCO

• Electric Drive Transportation Association

• Alternative Fuels Data Center

• EV Project

• evchallenge: Smart Kids, Clean Cars, Green World

• Megawatt Motorworks Features the emerging scene of high power electric vehicle motor sports.

• AC Propulsion Inc

• The Hydrogen Expedition Around the world on an electric vehicle

• Cree SAM website

• List of EV Lists

• Electric Vehicle Discussion List for owners and builders of conversions and other EVs

• Many Many More Links

• EV Supersite The world's largest online electric vehicle conversion diary. This popular site sees visitors from between 8 to 16 time zones per day. Hundreds of fully illustrated web pages describe the conversion of a Saturn sedan to an emissions-free battery-electric vehicle. Comprehensive and informative...

• EV engineer Steven Kent's site promoting his self published book, Kar Kaptains Kry, "Kalamity!" This book, the first of three, describes and justifies the short range high performance EV and another type combining internal combustion and mains-recharged batteries that he calls a "glider" (now commonly called a "plug in hybrid") and includes engineering and marketing analysis for mass production.

• Alternative Fuel Vehicle Training From the National Alternative Fuels Training Consortium.

• http://www.proev.com:80/ ProEV Inc. is a sister company to Lee Racing, a professional race team and race car prep shop located in Miami, Florida.

  7735 NE 8th Ave, Miami, FL 33138, USA   Tel. 305-610-6412

   

See also "http://www.driveclean.ca.gov/" for an official California site on ZEVs and PZEVs. 

A page on this site, "http://www.driveclean.ca" will also list the available cars in various categories, especially informative if you are looking for an electrically powered city car (that page has no entries).

The world's fastest street legal electric car

EV news stories

• Experts say electric cars should be part of research plans for automakers — "That's the advice of a panel of technical experts representing the National Academy of Sciences. They say government and industry researchers should examine battery electric vehicles as an alternative to cars and trucks powered by hydrogen fuel cells."

• Altair gets order for 1000 kg of lithium titanate spinel electrode nanomaterials [23] [24] [25] [26]

• Toshibas High-Rage (50C) Li, scheduled for 2006 production [27]

• San Francisco Chronicle: Owners charged up over electric cars, but manufacturers have pulled the plug 4/24/2005

• The Air We Breathe, The Cars We Drive, 2004

• The Electric-Car Slide, October 22, 2003

• Slim Fit For The Freeways Oct 2, 2003

• tzero earns a 3.40 GPA Sept. 29, 2003

• Stopping Traffic, Rick and Bryans Tango July 27, 2003

• tzero exciting article in NY Times Sep 20, 2003

HybridCars.com - includes articles on hybrid electric cars and their impact on the environment.

Howstuffworks: How Hybrid Cars Work - features an illustrated description of the parallel hybrid powertrain of the Toyota Prius.

FutureTruck - information about the competition which challenges students to modify SUVs into fuel-efficient hybrid-electric vehicles.

GreenHybrid.com - hybrid electric vehicle resource offering forums, articles, car comparisons, and performance statistics.

Care2.com: Hybrid Cars - gives an overview of how hybrid cars work.

UC Davis Hybrid Electric Vehicle Research Program - advanced Hybrid Vehicle research group.

Eartheasy: Hybrid Cars - contains news and information about the various hybrid cars in production as well as upcoming developments.

National Renewable Energy Laboratory (NREL): Hybrid Electric and Fuel Cell Vehicles - works toward developing hybrid electric vehicles (HEVs) and fuel cell vehicles (FCVs) with an eye towards moving them from research and development to the marketplace.

Wikipedia: Hybrid Car - overview including the history, technology, types, and perks of automobiles powered by internal combustion engines, electric motors, and battery rechargers.

California State University, Chico - Advanced Vehicle Research & Development - students designed and built a hybrid electric car.

Energy Quest: Hybrid Vehicles - short summary of the new type of cars that save energy.

MSN Money: Hybrid Cars - helps you decide whether purchasing a hybrid vehicle is the right choice for you over traditional combustion engine cars. Contains information and pricing on current models, the tax advantages of buying, and more.

Wired News: Hybrid Mileage Comes Up Short - hyperlinked article that examines the shortcomings of hybrid vehicles.

All About Hybrid Cars - offers a hybrid car buyer's guide ebook as well as model comparisons, related news articles, FAQs, and a directory of web resources.

Electromotive Hybrid Electric Development - introduces the Electromotive Strategic Power Assist Hybrid System.

Hybrid Car Information - offering hybrid electric car news and a guide to current and future hybrid models.

U.S. Department of Energy: Hybrid Electric Vehicles - contains information about HEV benefits, availability, maintenance, and history.

Hybrid-Cars-Guide.com - offers advice on choosing hybrid cars and information on hybrid vehicle technologies.

Dodge Viper v Tzero electric car

FORMULA E - Formula E is a class of auto racing sanctioned by the Fédération Internationale de l'Automobile (FIA). The "formula", designated in the name, refers to a set of rules with which all participants' cars must comply. Formula E is intended to be the highest class of competition for one-make, single-seat, electrically-powered racing cars. The series was conceived in 2012, with the inaugural championship to be held in 2014. Demonstration events are planned for the second half of 2013.

Former Formula One driver Lucas di Grassi was announced as the series test driver in September 2012. Forty-two cars were ordered in November 2012, with Formula One team McLaren providing the motor, transmission and electronics that all cars will use.

Ten host cities are planning races for the 2014 season; unlike most motorsport categories, Formula E races will be run exclusively on street circuits. Rio de Janeiro and Rome were the first host cities to be announced. FE holdings are currently in talks with London mayor Boris Johnson for a London race event.

RACING DRIVERS INDEX